Indiana University Libraries Book Repair Manual

Cut Pages Flat Paper Mend Hinge Mend Index Addition Spine Labels Tighten Hinges Tip-In Adhesive Injection Board Transplant Post Binder Recase Reback Partial reback New Case Adhesive Binding
Built-up Box CD Pocket Corrugated Clamshell Box Cloth-Covered Clamshell Box Mylar Encapsulation Pamphlet Binding Envelope with Sleeve Phase Box Portfolio Tuxedo Wrapper Kyle Wrapper
Angles Awls Backing Hammer Bench Brush Bone Folder Chisel Dry Cleaning Sponge Eraser/Crumbs Glue Brushes Hammer/Punch Heated Microspatula Knives and Sharpening Tools Microspatula Needles Rulers Scissors Syringe Tacking Iron Tweezers Vessels Weights Whisk
Adhesive Binding Tools Board Shear Corner Rounder Crimper Cutting Mats Freezer/Dryer Fume Hood Guillotine HEPA Vacuum Job Backer MEASUREpHASE Paste Tools Presses Press Boards Rivet Bucker Stapler Ultrasonic Welder Wet/Dry Vacuum
Adhesives Fasteners Filaments Tapes Pamphlets/Security Roll Materials Board/Card Paper Disaster Supplies
Glossary
Home

Hammer/Punch

This combination of tools is used for making the holes for the rivets in phase boxes. The hammer is an ordinary clawhammer. The punch is a "No. 2 hollow punch" and is tapered to a diameter of 1/8" at the tip. The punch, used alone, is also handy for removing the cloth from the holes of cloth-covered post binders, when the boards have been drilled prior to covering.